Saturday, March 31, 2012

6Volt Doorbell Light Circuit

6Volt Doorbell Light CircuitThis 6V battery operated doorbell light circuit can be affiliated in alongside with any absolute AC230V doorbell. When anyone advance the doorbell switch, the alarm sounds as accepted and ac mains accumulation accessible beyond the doorbell is baffled to the ascribe of this ambit through an opto-coupler(IC1).

Conduction of IC1 triggers a monostable, active about the acceptable old 555 timer (IC2). As a aftereffect the high-bright white LED (D2) at the achievement of IC2 is switched on for a abbreviate time. This ambit is awful advantageous at night/midnight as it gives acceptable calm ablaze to advice you locate switches for allowance lamp/porch light, etc. On/Off continuance of the LED ablaze can be increased/decreased by increasing/decreasing the amount of C2.

The electronic doorbell circuit is absolutely safe because it is altogether abandoned from the baleful ac mains accumulation by IC1. However, accumulate to abstain adventitious contacts with the foreground end of the circuit, which is anon affiliated to the ac supply. Use of a acceptable and acceptable ABS asylum is recommended for this doorbell ablaze unit.

[read here...]

Wednesday, March 21, 2012

Cable TV amplifier With 2 Transistors

Cable TV amplifier With 2 TransistorsThis is a actual simple cable TV amplifier application two transistors. This amplifier ambit is a lot of acceptable for cable TV systems application 75 Ohm coaxial cables and works accomplished up to 150MHz. Transistor T1 performs the job of amplification. Up to 20dB accretion can be accepted from the circuit.T2 is active as an emitter addict to access accepted gain.

Notes.

  • The circuit can be assembled on a Vero board.
  • Use 12V DC for powering the circuit.
  • Type no of the transistors are not very critical.
  • Any medium power NPN RF transistors can be used in place of T1 and T2.
  • This is just an elementary circuit. Do not compare it with high quality Cable TV amplifiers available in the market.
[read here...]

Sunday, March 4, 2012

MSK5012 Adjustable Voltage Regulator 10A

MSK5012 is a awful reliable adjustable voltage regulator.Whose achievement can be programmed application two resistors. The regulator has a actual low dropout voltage(0.45v @10A )due to the acceptance of MOSFT with actual low Rds (ON) as the centralized alternation canyon element.The MS5012 has a top akin of accurateness and ripple bounce is about 45dB. It is accessible in a 5 pin Sip amalgamation that is electrically abandoned from the centralized circuitry. This accord us the abandon to fit the IC anon to the calefaction bore and this array of absolute heatsinking improves the thermal dissipation. 

The achievement voltage of this circuit is adjustable from 1.3v to 36v DC.Resistors R1 and R2 are acclimated for programming the achievement voltage. For all applications, amount of R2 is anchored to 10K. The accord amid R1,R2 and achievement voltage Vout is according to the blueprint R1=R2(Vout/1.235)-1. C1 is a clarify capacitor which is aswell a allotment of the aboideau drive circuit of the centralized alternation canyon MOSFET. About three times the ascribe voltage will arise beyond this capacitor and so the its voltage appraisement have to be called accordingly.C2 is the ascribe clarify capacitor while C3 is the achievement clarify capacitor.
[read here...]